Overhead Conveyor Chain for Powder Paint Line
Chain maintenance and precautions
Different types loading of chain
| chain |
loading |
| Chain X348 |
150kgs |
| Chain X-458 |
250kgs |
| Chain X-678 |
400kgs |
| Chain T160 |
450kgs |
| Chain 5TONS |
One point 50kgs |
| Chain 7TONS |
One point 70kgs |
1.)5 tons standard chain
Features: The chain designed for hanging conveyer,
With large Angle of curved space, easy to install, suitable for general situation
2.)5 tons horizontal wheel heavy chain
Features: Change the standard wheel to negative heavy, to improve the bearing capacity and wear
resistance, prolong service life, applicable to many curved or higher temperature in a production
environment.
3.)5 tons of vertical wheel heavy chain
Features: Change the vertical wheel to negative heavy, reduce the chain after lifting Angle when the
resistance, increase the bearing capacity and wear resistance, suitable for frequent lifting or higher
temperature in the production environment
4.)5 tons horizontal/vertical wheel heavy chain
Features: Change the horizontal and vertical chakras are to bear the heavy, its bearing capacity
and abrasion resistance for this kind of chain of solidifying, apply to the circuit is very complicated,
hanging heavier workpiece and higher temperature production environment
Different types conveyor system
Lines after the installation, check whether there is different sound transmission seat, adjust the
seat is flexible and scalable, Bend and lift part if there is a different sound, chain running jitter,
if there is any abnormal, please ruled out.
After line normal operation, in the chain of the easy friction point injection of solid high temperature
grease, After injection, using the cup-feed oiler and tanker injection high temperature lubricating oil.
Regularly check the chain operation and lubrication condition, use of inferior oil residue jam happened.
The chain or powder into the chain should be clear in time.
Bend and lifting parts should be replaced in a timely manner.
Grasp the actual temperature oven, cannot make the chain more than normal temperature for a
long time running.
Can't make the chain operation in the distortion of environment.
The operation of the complex environment and the small turning radius can make chain damage and deformation,
The design should consider the rationality of operation.
Audited Supplier 
){kind=link}