| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | colo-1118 |
| Worksize dimensions | 1000width x 1800 height x1000 depth |
| Overall dimensions | 1165 width x 2170 height x 1165 depth |
| Power supply | Electric |
| Voltage/Frequency | 380V/220v(50-60hz),3phase |
| Warm-up time | 15-30 min. (180° C) |
| Temperature stability | < ± 1-3°C |
| Temperature max. | 250° C |
| Fan motor | 0.75kw |
| Warranty | 12 months |
Powder Coating Working Processing:
1. Firstly the raw material will through chemical to remove the oil, rust etc
2. Then put it into drying oven to dry water
3. The work pieces with go to spray booth
4. On front and back of the spray booth have 2 positions for operator to paint powder, they use manual spray gun, or auto gun with robot machine, to paint the powder to cover the work pieces
5. The spray booth equipped with 1 set mono-cyclone, 1 set powder centre to recovery flow powders
6. After paint powders the work pieces will go to curing oven to bake 20~30 minutes with 180~230 degree high temperature
7. Out of curing oven, natural cooling 15 minutes, finish.
){kind=link}