Easy-Cleaning Design Cartridge Filters Powder Coating Spray Booth
Pulverspruhkabine
Automated powder application systems, recycle by filters cartridges.
include powder spray booth
Reciprocator
Powder coating machines
Please let me know which size do you want to paint, then we can give you quotation
Specification:
1.Spray booth:
1.Size: W1.2*H2.5*D4m
2.Booth board: SPCC/= 1.5mm Bending and forming
3.Under frame:4 # square tube
4.Recycle Filters:325*900mm- 6pcs
5.fan motor: 3.5kw
6.Reciprovator :CL-2100D travel:1.5m/2pcs
7.Automatic gun:8pcs
8.Power total:5.5KW, 220v,60hz
2.Technical data
| Model |
COLO-4125 |
| Booth Type |
drive-thru |
| Operator dimensions |
1200width x 2500 height x 4000 depth |
| Weight |
750kg |
| Power supply |
Electric |
| Nominal power |
5.5kW |
| Voltage |
380V |
| Frequency |
50-60Hz |
| Filters |
Polyester |
| Filters count |
6 |
| Filters hang type |
easy for change |
| Filter cleaning system |
Pneumatic |
| Warranty |
12 months |
| Dismantling: |
|
| 1.fix the screw on the top |
| 2.Hold the cartridge with both hands, so that the filter's six ears for quick release cover six corresponding gap |
| 3.His hands up top, while the rubber ring as a fulcrum to sixty degrees clockwise |
| 4.Check the filter is fully embedded in the quick release cover, hand gently pulled the filter is securely |
4.Control cabinet-Bottom:
1,power on/off
2,hopper go up/go down
3, emergency stop
PLC Controller
Operation:
| 1.press bottom 1 ,make the power on |
| 2,Press ↑or↓ ,make the display screen display like this |
| 3,Press F4 ,then into the booth control interface like this |
| 4,Press F6,then the fan will on ,like this |
When you want to stop the work, please press F6 ,make the fan off, like this
Then press the bottom 1 to make the power off.
In the side of the booth have the switch to control the light lamp
Any question,just contact us!!
Audited Supplier 
){kind=link}