Industrial Infrared Gas Burner Heating Type Powder Coating Oven For Metallic Product
1.Infrared Industrial Continuous Cure Oven Powder Painting Line
IR continuous cure oven
when necessary,infrared options are available on cure oven,IR components can be used to gel powder,
boost preheating and reduce cycle times,or minimize floor space requirements,because pars have to
be seen by the infrared heat emitter in order to produce consisttent cure rates,parts must meet
specific configurations.
2.Description:
Expandable as your needs grow
Maximum temperature: 482 degrees F
Aluminum and galvanized steel construction
Automatic controls-PLC system:
Control provides high precision heating process ,it offers all the features you need .
the LED display allows you to set the tempureture,as well as the duration of heating process
at the desired temperature
3.Technical data
Model
|
colo-5219 |
| Worksize dimensions |
1900width x 1900 height x 5000depth |
| Overall dimensions |
2100width x 2200 height x 5200depth |
| Power supply |
LPG/Gas/Diesel |
| Voltage/Frequency |
380V/220v(50-60hz) |
| Warm-up time |
15-30 min. (180°C) |
| Temperature stability |
< ± 3.0-6°C |
| Temperature max. |
250° C |
| Motor power |
7.5kw |
| Circulation/Air-flow |
Vertical,Variable through holes on the walls |
| Ventilation performance |
8288-16576 m3/h |
| Trolley |
two trolley |
4.Here are some more benefits to using an Infra-Red Oven:
Rapid Temperature Increase and Minimal Floor Space Required
Typically the use of infra-red will cause the intended process to be sped up by a rate of 3:1. In other words, if the process time was 30 minutes it can often be reduced to 10 minutes. Because of this fact, the required floor space can be reduced as well.
1)Lower Operating Costs
Infra-Red does not heat up the entire oven but only the part being processed. Due to this, less energy is used to produce the same results.
2)Precise Temperature and Process Control
With an infra-red oven there is an expanded array of controllability. Part sensors to turn the oven on, separate zoning for different parts and repeatable menus with touch screen PLC's are just a few of the options available.
3)No Cross Contamination
Infra-Red heat is transmitted in a very quiet and non-disturbing way. Once the curing process begins the coating is gelled, or liquefied, to the part and cannot be blown from one to the other.
4)Environmentally Friendly (No Noxious Fumes or Carbon Monoxide)
Catalytic infra-red is produced by a flameless reaction. The bi-products of this flameless reaction are CO2, water vapor and long to medium wave infra-red heat
5.Infared gas burner
Different Types
| MODEL |
Dimension |
Weight |
Gas Type |
Heat Output |
Consumption |
| |
mm |
kg |
|
KW/h |
Kcal/hr |
NG(m3/h) |
LPG(kg/h) |
| HD61 |
423*80*94 |
3.8 |
NG/LPG |
2.4 |
2030 |
0.18 |
0.18 |
| HD82 |
219*164*108 |
4.8 |
NG/LPG |
3.1 |
2700 |
0.24 |
0.24 |
| HD101 |
690*80*115 |
6.9 |
NG/LPG |
3.9 |
3380 |
0.3 |
0.29 |
| HD162 |
570*130*175 |
8 |
NG/LPG |
6.3 |
5400 |
0.49 |
0.47 |
| HD242 |
840*130*175 |
11.7 |
NG/LPG |
9.4 |
8120 |
0.75 |
0.71 |
| HD262 |
930*130*175 |
13 |
NG/LPG |
10.9 |
9360 |
0.8 |
0.82 |
Applied Range
Infrared catalytic gas burner is good choice industrial drying,baking or curing oven,especially in tunnel&conveyor oven,saving production&equipment cost,demand of space is small and easy to control...
It matched with auto-ignition,safe controller and keep stable temperature.Now is already widely used industrial drying.
6.More details Contact:
Audited Supplier 
){kind=link}