Manual / Automatic powder coating line coat Aluminium sections
Linea De Pintura En Polvo / Planta De Pintura En Polvo
Are you looking for a supplier to set up a new powder coating plant for aluminum profile?
So why not choose us?
We have set up many set aluminum profile powder coating line for different factory
And we can sent our technical staff overseas to asist your powder coating plant installation.
How do order powder coating line?
Tell us your workpiece max size& max weight, output plan, heat source,fanctory area
Ect, we will custom-made for you only!
Machining program:
Pre-treatment ---drying oven --manual or automatic powder coating spray booth ---cured oven
---take off from the trolley car or conveyor system
We can supply different 4 layout for aluminum profile powder coating line
1.manual aluminum profile powder coating line
| *Manual powder coating booth with overhead track,two operating position at both side of booth |
| *box oven for curing |
| *Ground track system and movable trolley for transportation. |
2.Compact aluminum profile powder coating line
Two synchronized conveyors,box oven,the conveyor is running in vertical plane instead of
horizontal plane,This design takes very small space,but need the height of 6m at least.
The capacity of theis design is limited,for example,for standard aluminum profile,about 3~4
tons of profile can be powder coated in 8 hours only.this type is a good choice for customers
with very limited space.
3.Traditional Horizontal aluminum Profile Powder coating line
The parts always move along with conveyor,even turn the corner,The output capacity will be
higher if the conveyor speed is faster,in this case,the curing oven lenght should be longer,so
the powder coated parts can be cured completely,this desigh is simple and reliable and the
maintenance is easy,but the production capacity is limited by oven lenght.
4.Vertical aluminum Profile Powder coating line
This type of powder coating line is especially designed for aluminum profile,The
norminal capacity of such line can reach to 40-60 tons per 8 working hours, considering
the weight of 4kg for a profile of 6 m long.
in vertical line,the aluminum profiles position are changed in loading section from horizontal into vertical,Then the profile go through the coating process and finally at unloading section,
the profiles position change into horizontal again.
The advantage of such line is its huge capacity,To install the vertical line,the height should be 14m,the huge equipment used in this line are manufactured exclusively for this type of line,The conveyor speed can be adjusted up to 3m/min.
5. Power & Free conveyor line
power and free conveyor,box curing oven
Power and free conveyor is highly automatic and integratve,which can stop individual loads
without stopping the entire production line,The main conveyor is moving continuously,but
another loading conveyor just move step by step(position:inside the oven,loading & unloading area).
Manual powder coating system details:
Pendant size ≤ 4.3 m
Pendant car weight: 1000kg
Powder coating oven :
| 1.External dimensions |
L7000 × W2000 × H2300mm |
| 2.heating method of oven |
LPG |
| 3.The maximum furnace temperature |
220 -250 degree |
| 4.Working temperature |
180-220 degree, adjustable, automatic adjustment |
| 5.Spray wall insulation materials |
cold-rolled steel |
| 6.Insulation thickness |
100~150mm |
| 7.inner wall of curing oven material |
galvanized steel |
| 8.Temperature sensor |
controls the temperature of the operating condition of the burner |
| 9.Rockwool insulation materia |
high quality l grade |
gun type:Electrostatic powder coating gun
| 1. Input voltage |
220V, 50-60Hz, 40W |
| 2.Output voltage |
0-100KV continuous adjustable |
| 3.Output current |
≤ 100μA |
| 4.Gun Weight |
550g |
| 5.adjustable spray volume |
0-600g/min |
| 6. powder keg |
(loaded powder device) stainless steel
|
Powder spray booth :
| 1.Powder recovery system |
filter |
| 2.Spray Outdoor Dimensions |
L4820mm × W1700mm × H2370mm
workpiece exit and entry si |
| 3.workpiece exit and entry |
W500mm × H1700mm |
| 4.Operating opening size |
W600mm × H1400mm |
| 5.Spray from the spray plate assembly chamber material |
(base: δ = 2.0mm,
Spray chamber: δ = 1.5mm) |
| Color standard spray chamber |
|
| Spray chamber square tube steel base material |
|
| Lighting |
2 × 40W (4 sets) |
| Fan motor |
7.5kw |
Customer must provide:
4.Vertical aluminum Profile Powder coating line
More intresting about the aluminum profile powder coating line please view more.
We are looking forward to get your enquiry
Contact : Diana
Telephone:86-13396500051
Audited Supplier 
){kind=link}