New Type Industrial Automatic Powder Spray Booths For Ecuador Customer
equipo de cabina
Industrial Automatic Spray Booths easy operation with good powder recovery systems.
our customer of Ecuador buy 1 automatic powder spray booth,Reciprocator:1set,travel:2.5m,
Automatic gun:4pcs,manual gun:1pcs,
we ordered a 20GP to send the goods in Assembly
booth size and color can be designed by the requst.
Specification:
1.Spray booth:
Inner Size: L3000 x W1400x H1550mm
Booth board: SPCC/= 1.5mm Bending and forming
Under frame:40# square tube
Filters:325*900- 4pcs
fan motor: 5.5KW, 1pcs
2.Technical data
Model |
COLO-S-3145 |
Booth Type |
drive-thru |
Operator dimensions |
1400width x 1550 height x 3000 depth |
Weight |
750kg |
Power supply |
Electric |
Nominal power |
5.5kW |
Voltage |
380V |
Frequency |
50-60Hz |
Filters |
Polyester |
Filters count |
4 |
Filters hang type |
easy for change |
Filter cleaning system |
Pneumatic |
Warranty |
12 months |
3.Replacing the filter cartridges Replacing the filter cartridges
Procedure for replacing the filter cartridges
If a filter cartridge is damaged, but the damage can not be found, then the complete filter
cartridges set must be replaced. The access to the filter
cartridges takes place from the rear of the booth
Dismantling: |
|
1.fix the screw on the top |
2.Hold the cartridge with both hands, so that the filter's six ears for quick release cover six corresponding gap |
3.His hands up top, while the rubber ring as a fulcrum to sixty degrees clockwise |
4.Check the filter is fully embedded in the quick release cover, hand gently pulled the filter is securely |
4.Control cabinet-Bottom:
1,power on/off
2,hopper go up/go down
3, emergency stop
PLC Controller
Operation:
1.press bottom 1 ,make the power on |
2,Press ↑or↓ ,make the display screen display like this |
3,Press F4 ,then into the booth control interface like this |
4,Press F6,then the fan will on ,like this |
When you want to stop the work, please press F6 ,make the fan off, like this
Then press the bottom 1 to make the power off.
In the side of the booth have the switch to control the light lamp
5.pic details show
Any question,just contact us!!