Walk in Powder Batch Coating Room Loading to Myanmar

• Customization: Available
• Voltage: 110V/380V
• Warranty: 1 Year
• Model NO.: CL-3924
• Brand Name: Colo
• Size: 3910mmw*2440mmh*D2440mm
• Weight: 750kg
• Kind: Drive-Thru
• Power(W): 5.5kw
• Power Supply: Electric
• Booth Board: SPCC/= 1.5mm
• Filters: 12PCS
• Type: Electrostatic Spraying Equipment
• Application: Hardware Spraying Equipment
• Coating: Powder
• Certification: CE, ISO
• Method Type: Manual
• Condition: New
• After-sales Service: Online
• Transport Package: Wodden Case
• Specification: can be ordered
• Trademark: COLO
• Origin: Hangzhou. China
• HS Code: 8424899990
• Production Capacity: 1000PCS

Product Description

Walk in Powder Batch Coating Room Loading To  Myanmar
equipo de cabina    bwth cotio powdwr   pulverlakkering messe
Industrial Automatic Spray Booths easy operation with good powder recovery systems.
booth size and color can be designed by the requst.

Specification:

1.Spray booth: 
Inner Size: 2400width x 3900 lenght x2400 depth
Booth board: SPCC/= 1.5mm Bending and forming
Under frame:40# square tube
Filters:325*900- 6pcs 
fan motor: 5.5KW, 1pcs 

2.Technical data
 

Model	COLO-3924
Booth Type	drive-thru
Operator dimensions	2400width x 3900 lenght x2400 depth
Weight	750kg
Power supply	Electric
Nominal power	5.5kW
Voltage	380V
Frequency	50-60Hz
Filters	Polyester
Filters count	12
Filters hang type	easy for change
Filter cleaning system	Pneumatic
Warranty	12 months

3.Drawing  pic


4.Replacing the filter cartridges Replacing the filter cartridges
Procedure for replacing the filter cartridges
If a filter cartridge is damaged, but the damage can not be found, then the complete filter
cartridges set must be replaced. The access to the filter
cartridges takes place from the rear of the booth

 

Dismantling:
1.fix the screw on the top
2.Hold the cartridge with both hands, so that the filter's six ears for quick release cover six corresponding gap
3.His hands up top, while the rubber ring as a fulcrum to sixty degrees clockwise
4.Check the filter is fully embedded in the quick release cover, hand gently pulled the filter is securely

5.Control cabinet-Bottom:
1,power on/off
2,hopper go up/go down
3, emergency stop
PLC Controller
Operation:

1.press  bottom 1 ,make the power on

2,Press ↑or↓ ,make the display screen display like this

3,Press F4 ,then into the booth control interface like this

4,Press F6,then the fan will on ,like this

When you want to stop the work, please press F6 ,make the fan off, like this
Then press the bottom 1 to make the power off.
In the side of the booth have the switch to control the light lamp
6.pic details show
1)Front view

2)Back view

3)Side view


Any question,just contact us!!