Infrared Industrial Continuous Cure Oven Powder Painting Line

• Customization: Available
• After-sales Service: Online
• Warranty: 12 Months
• Model NO.: COLO-IR-1
• Type: Coating Production Line
• Coating: Powder Coating
• Substrate: Steel
• Certification: CE
• Condition: New
• Marca: Hicolo
• Usar: Pintura Electrostatica
• Voltaje: 220V/380V
• EL Tiempo De Entrega: 15 Dias
• Frequency: 50-60Hz
• Trolley: Matched with Different Size
• Temperature Max.: 250 C
• Warm-up Time: 1.5kw
• Warm Board: Thickness 100mm
• Fan Motor: 7.5kw
• Transport Package: Bulk in
• Specification: CE
• Trademark: COLO
• Origin: Zhejiang /China
• HS Code: 8424899990
• Production Capacity: 20PCS /Month

Product Description

Infrared Industrial Continuous Cure Oven Powder Painting Line


1.Infrared Industrial Continuous Cure Oven  Powder Painting Line
IR continuous cure oven
when necessary,infrared options are available on cure oven,IR components can be used to gel powder,
boost preheating and reduce cycle times,or minimize floor space requirements,because pars have to
be seen by the infrared heat emitter in order to produce consisttent cure rates,parts must meet
specific configurations.
 
 
2.Description:                   
Expandable as your needs grow
Maximum temperature: 482 degrees F
Aluminum and galvanized steel construction
Automatic controls-PLC system:
Control provides high precision heating process ,it offers all the features you need .
the LED display allows you to set the tempureture,as well as the duration of heating process
at the  desired temperature

3.Technical data
 

Model	colo-5219
Worksize dimensions	1900width x 1900 height x 5000depth
Overall dimensions	2100width x 2200 height x 5200depth
Power supply	LPG/Gas/Diesel
Voltage/Frequency	380V/220v(50-60hz)
Warm-up time	15-30 min. (180°C)
Temperature stability	< ± 3.0-6°C
Temperature max.	250° C
Motor power	7.5kw
Circulation/Air-flow	Vertical,Variable through holes on the walls
Ventilation performance	8288-16576 m3/h
Trolley	two trolley

4.Here are some more benefits to using an Infra-Red Oven:
Rapid Temperature Increase and Minimal Floor Space Required
Typically the use of infra-red will cause the intended process to be sped up by a rate of 3:1. In other words, if the process time was 30 minutes it can often be reduced to 10 minutes. Because of this fact, the required floor space can be reduced as well.

1)Lower Operating Costs
Infra-Red does not heat up the entire oven but only the part being processed. Due to this, less energy is used to produce the same results.

2)Precise Temperature and Process Control
With an infra-red oven there is an expanded array of controllability. Part sensors to turn the oven on, separate zoning for different parts and repeatable menus with touch screen PLC's are just a few of the options available. 

3)No Cross Contamination
Infra-Red heat is transmitted in a very quiet and non-disturbing way. Once the curing process begins the coating is gelled, or liquefied, to the part and cannot be blown from one to the other.

4)Environmentally Friendly (No Noxious Fumes or Carbon Monoxide)
Catalytic infra-red is produced by a flameless reaction. The bi-products of this flameless reaction are CO2, water vapor and long to medium wave infra-red heat


5.Some questions

Myth	Truth
"I-R is line of sight. My part is pretty complex and an infra-red oven won't work."	Infra-Red energy is exactly what we get from the sun and even when we are not standing directly in front of the sun, we can still feel the effects. With increased technological advances, heater placement and oven design we are able to achieve a more even distribution of energy and that translates into better curing. Don't just take my work for it, send us some of your parts and we'll run them through our testing facility.
"Infra-Red is not a good method for drying off parts."	Vulcan Catalytic Industrial Ovens produce long to medium wave infra-red energy. It is this particular intensity of infra-red that is easily absorbed by organic coatings such as powder and liquid as well as water. As a result, these coatings increase in temperature when exposed to catalytic heaters.   Catalytic infra-red ovens are not suited for every dry off application, however, they are an excellent alternative regarding space and energy concerns in certain areas.
"Heat is the same regardless of how it is applied, it takes the same amount of time to heat up and the same amount of time to cool down"	In any process whether you are cross linking powder, curing paint or drying water the main concern is getting Btu's into the coating.  Since infra-red energy is absorbed first by the organic coating that is present on the part (e.g. powder, paint, water, etc.) we do not need to heat up the part in order to begin the intended process. It is also because of this that, quite often, the substrate cools much quicker too.