Multi Cyclone Automatic Powder Painting Systems For Car Rim
1.Specification:
1.Spray booth:
Inner Size: L4000 x W800x H1300mm
Booth board: SPCC/= 1.5mm Bending and forming
Under frame:40# square tube
Cyclone tubes:-2pcs
Fan motor: 7.5KW, 1pcs
2.Features
1)Mono-Cyclone two-tube structure makes clean up shorter color change;
2)Mono-cyclone separation rate of up to 98% cyclone bottom cone bucket can be quickly
separated from the barrel for easy cleaning;
3)Disc Cone bucket and cylinder junction of the filter shaking motor efficiency vibration screening
4)Removable disk cleanup filter with change;
5)Bevel the bottom of the bucket can be configured to work in alternate double balloon valve;
Bevel the bottom of the bucket can be configured to pump fluidized powder + powder pump
delivery forms;
6)Exhaust pipe at the bottom end face of the circular cover plate can bequickly disassembled for cleaning;
P
lease let me know which size do you want to paint, then we can give you quotation
3.Technical data
| Model |
COLO-S-B-02 |
| Booth Type |
Multi-Cyclone |
| Operator dimensions |
0.8m*4m*1.3m |
| Overall dimensions |
1m*4m*1.55m |
| Weight |
1000kgs |
| Power supply |
Electric |
| Nominal power |
7.5KW |
| Voltage |
380V |
| Frequency |
50-60Hz |
| Filters |
Polyester |
| Filters count |
9pcs |
| Filters hang type |
easy for change |
| Filter cleaning system |
Pneumatic |
| cyclone |
2 cyclone tube |
| Rotation wing self-cleaning cartridge filter unit |
1set |
| fliud hopper |
1set |
| Warranty |
12 months |
Double side with the reciprocator
| Dismantling: |
|
| 1.fix the screw on the top |
| 2.Hold the cartridge with both hands, so that the filter's six ears for quick release cover six corresponding gap |
| 3.His hands up top, while the rubber ring as a fulcrum to sixty degrees clockwise |
| 4.Check the filter is fully embedded in the quick release cover, hand gently pulled the filter is securely |
PLC Controller Operation:
| 1.press bottom 1 ,make the power on |
| 2,Press ↑or↓ ,make the display screen display like this |
| 3,Press F4 ,then into the booth control interface like this |
| 4,Press F6,then the fan will on ,like this |
When you want to stop the work, please press F6 ,make the fan off, like this
Then press the bottom 1 to make the power off.
In the side of the booth have the switch to control the light lamp
5.Any question,just contact us!!
Audited Supplier 
){kind=link}
){kind=link}